Products

Plasters

Wall and surface filler (Széria-Glett) 0-10

Suitable for thicknesses of 0 to 10 mm, can be used for different purposes, extra white skimming plaster for interior use
  • Perfect for smoothing concrete walls and rendered surfaces (feathered out to 0 mm and up)
  • Well suitable for skim coating plasterboards and for use as a joint compound for taping plasterboard joints.
  • Also good for plastering brick and concrete surfaces (up to thicknesses of 10 mm)
  • Pot life: approx. 75-90 minutes
Pack sizes:
1 x 25 kg 40 bags/pallet
1 x 5 kg 180 bags/pallet
1 x 2,5 kg 240 bags/pallet

Jointing filler (Széria-Hézagoló)

Fibre-reinforced non-shrinking joint compound.
  • Perfectly suitable for manually sealing and covering seams between sheets of drywall.
  • No drywall joint tap is required if surface is properly prepared.
  • Does not shrink when dry, meaning that extra skimming can be spared in most cases
  • Pot life: approx. 45 minutes
Pack sizes:
1 x 20 kg 48 bags/pallet
1 x 5 kg 160 bags/pallet
 

Finishing compound for outdoor (kültéri glett)

Cement base dry-set mortar for smoothing, frost-proof, for exterior and interior use, suitable for thicknesses of 0 to 10 mm.
  • Perfect for smoothing concrete walls, and cement-base plasters
  • Pot life: approx. 100-120 minutes
Pack sizes:
1 x 25 kg 48 bags/pallet
1 x 5 kg 160 bags/pallet
 

Plasters of Paris

Keramod 125 plaster of Paris

Ready-mixed, extra white plaster of Paris.
  • For plastering works and for filling gaps and cracks
  • For repairs and for skim coating before painting.
  • Suitable for ornamental applications, such as:
    • making statues
    • modelling
    • stucco and moulding
  • Can also be used for making ceramics
  • Pot life: approx. 10-12 minutes
Pack sizes:
1 x 30 kg 35 bags/pallet
1 x 15 kg 60 bags/pallet
1 x 5 kg 192 bags/pallet
1 x 2 kg 480 bags/pallet
 

Special plasters

Alpha plasters - Alpha AGR 40

High-quality natural anhydrite used as a basic substance for building products.
Pack sizes:
1 x 25 kg 42 bags/pallet
- ömlesztett silóban
 

Anhydrite - Micro A (natural anhydrite)

High-quality natural anhydrite used as a basic substance for building products.
Pack sizes:
1 x 30 kg 35 bags/pallet
 

Casting plasters - Spezial 58-48

Spezial 58-48 is a high-quality casting plaster. For making ceramics, building ornaments and statues.
  • Extra hard and extra flexible
  • Contains expansion limiting agents
  • Can be coloured as required
Pack sizes:
1 x 40 kg 24 bags/pallet
- ömlesztett silóban
 

Casting plasters - Spezial 40W

Spezial 40W is a high-quality casting plaster. Suitable for making moulds, building ornaments and ceramics, for buildings and other construction projects.
Pack sizes:
1 x 40 kg 24 bags/pallet
 

Dental plasters - P20 dental

P20 is a universal dental impression compound for dental laboratories.
  • Hard and highly resistant
  • Hardness rating: Class 2
Pack sizes:
1 x 25 kg 40 bags/pallet
1 x 5 kg 200 bags/pallet
 

Dental plasters - P35 dental

P35 is an ideal hard plaster for precision dental works and for casting.
  • Extra hard and highly resistant, easy to detach
  • Hardness rating: Class 3
  • Fast setting
  • High hardness
  • Extra smooth surface
  • Available in white, yellow, pink and blue colours
Pack sizes:
1 x 25 kg 40 bags/pallet
1 x 5 kg 200 bags/pallet
 

Anhydrite - casufill A5 - (natural anhytrite)

Casufill A5 is a very fine milled natural anhydrite without any additives. Casufill A5 is used for building chemistry products or as shrinkage reducing admixture in cementitious systems.

Pack sizes:
1 x 25 kg 40 bags/palett
- bulk in Big-bag
- bulk in Silo

Anhydrite - Raddipur (thermal Anhydrite)

Raddipur is pure calcium sulfate and it is produced as thermal Anhydrite based on FGD-gypsum. Raddipur is calcined is a circulating fluidized bed furnace; afterwards it will be fine milled. This production process ensures a high equality and a very low content of free lime. Raddipur does not contain any additives. The main application is calcium sulfate binden for floor screeds and the use in the building chemistry.

Pack sizes:

1 x 25 kg 40 bags/palett
- bulk in Big-bag
- bulk in Silo

Estrich products

Anhydrite Estrich

Can be spread with all known plastering machines and estrich pumps suitable for watery estrich.
  • 0-1.25 mm grain size
  • Compressive strength: approx. 25 N/mm2
Pack sizes:
1 x 40 kg 30 bags/pallet
 

Lightweight Estrich

Floor screed for thicknesses from 10 to 30 mm Anhydrite-base, can be applied manually or by using power equipment.
  • Suitable for all types of interior surfaces
  • Also suitable for underfloor heating systems.
  • The surface is hard enough to walk on within approx. eight hours and is ready for finishing in about 24 hours.
Pack sizes:
1 x 25 kg 42 bags/pallet
 

Primers

Universal primer

Dilutable primer Universal material formulated for walls and floor systems.
  • Can be diluted with water at 1:4 ratio
  • For interior and exterior use
  • Can be applied as a protective coat in interior areas
Pack sizes:
1 x 1 liter 20 flask/box
600 flask/pallet
1 x 5 litre 80 can/pallet
1 x 10 litre 33 can/pallet
 

Mortars

Contact Mortar (Mestervakolat) 5-30

Gypsum-base mortar developed for painters and decorators, suitable for thicknesses of 5 to 30 mm, for manual or machine application that can be skimmed in the mass, for interior use.
  • its surface is suitable for painting, paper-hanging and tiling
  • it has excellent breathability
  • good insulator
  • coverage: approx . 8 kg / m2 / 10 mm
  • Pot life: approx. 70–95 minutes
Pack sizes:
1 x 25 kg 40 bags/pallet
1 x 5 kg 160 bags/pallet
 

Contact Mortar (Széria-Vakolat) 6-40

Gypsum mortar, suitable for thicknesses of 6 to 40 mm, highly adhesive plaster for manual application.
  • Formulated for plastering the whole surface of interior walls and ceiling.
  • If used as a render it is suitable for carrying the topcoat render and tiling.
  • If used as a smoothing and topcoat render, it can be painted or wallpapered.
  • Pot life: approx. 110-120 minutes
Pack sizes:
1 x 25 kg 40 bags/pallet
1 x 5 kg 160 bags/pallet
 

Casuplast 1200 Gypsum machine plaster

Gypsum mortar, can be spread with all known plastering machines.
  • For interior use as a render, smoothing and topcoat render
  • It is suitable to carry the topcoat render (lightweight render)
  • For tile, paint and wallpaper
Pack sizes:
1 x 25 kg 40 bags/pallet
- bulk in silo
 

Gypsum plasters

Gypsum plaster (Siniat)

Grade G4/A2 gypsum plaster of natural origin from Romania, for use in buildings and other construction projects.
  • Suitable for general household fitting and repairs
  • Pot life: approx. 10-12 minutes
Pack sizes:
1 x 20 kg 54 bags/pallet
1 x 10 kg 80 bags/pallet
1 x 5 kg 192 bags/pallet
1x 2 kg  480 bags/palett
 

Gypsum adhesives and gypsum binders

Gypsum binder

Fast setting binding plaster.
  • For installation and fitting works
  • Suitable for household fitting and repairs
  • Fast setting (5 minutes).
Pack sizes:
1 x 25 kg 40 bags/pallet
1 x 5 kg 108 bags/pallet
 

Plasterboard adhesive compound

Special drywall adhesive.
  • Suitable for the adhesion of plasterboards, gypsum fibres and other gypsum boards to solid surfaces
  • Pot life: approx. 60 minutes at 20°C
Pack sizes:
1 x 30 kg 35 bags/pallet
 

White cements

Danish white cement (Aalborg white cement)

Danish white cement EN - 197-1 - CEM I 52,5 N grade. Fast-setting Portland cement in bright white colour.
  • High early (2 day) and final (28 day) strength rating
  • For making white cements, preblended dry mixtures, mortars, paving stones, paving blocks, other similar finishes and artificial stone tiles
  • For manufacturing grouts, plasters, skimming mortars and adhesives.
Pack sizes:
1 x 25 kg 60 bags/palett
1 x 5 kg 200 bags/pallet
1 x 2 kg 500 bags/pallet
- bulk in Silo
 

Slovakian white cement (Rohoznik white cement)

Slovakian white cement, CEM I 52.5 N grade.
  • For making topcoat plasters
  • For manufacturing drywall adhesives
  • For manufacturing tiles and paving stones
  • For gardens and for carving
Pack sizes:
1 x 25 kg 48 bags/pallet
- bulk in silo
 

Floor screeds

Self-levelling floor screed (floorliner AK)

Anhydrite-base, can be applied manually or by using power equipment, for thicknesses of 2 to 15 mm.
  • Suitable for all types of interior surfaces.
  • Also suitable for underfloor heating systems.
  • The surface is hard enough to walk on within approx. eight hours and is ready for finishing in about 24 hours.
Pack sizes:
1 x 25 kg 42 bags/pallet
 

Lightweight Estrich

Floor screed for thicknesses from 10 to 30 mm Anhydrite-base, can be applied manually or by using power equipment.
  • Suitable for all types of interior surfaces
  • Also suitable for underfloor heating systems.
  • The surface is hard enough to walk on within approx. eight hours and is ready for finishing in about 24 hours.
Pack sizes:
1 x 25 kg 42 bags/pallet
 

Lime hydrate

Paints

natural+ Lime paint